1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 293Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 293

ENGINECOOLING Disassembly Inspection780cc Models Crankshaft Truing Lubricate the bearings and clamp the crankshaft securely
.004 (.1 mm) AHIGH .004 (.1 mm) NOTE: The rod pin position in relation to the dial indicator position tells you what action
is required to straighten the shaft3To correct situation like the one shown in the illustration at right, squeeze the crankshaft
at point A(Use tool from alignment kit) SUPPORT CRANKSHAFT AT THESE TWO BEARINGS HIGH 002 (.05mm) HIGH .005 (.13mm) 4If the
crank rod pin location is 180 from the dial indicator (opposite that shown above), it will be necessary to spread the crankshaft
at the position as shown in the illustration at rightWhen rebuilding and straightening crankshaft, straightness is of utmost