1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 304Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 304

ENGINECOOLING DisassemblyInspection Polaris 1Remove carburetors 2 Remove starter motorInspect O-ring and bore in cover for
stutters 4Measure air gap between fiber reed and reed block as shownThe air gap should not exceed .015# (.4 mm)If clearance
is excessive DO NOT attempt to reverse the reeds to reduce the air gapAlways replace them if damagedCheck each fiber reed