1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 333Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 333

ENGINECOOLING Oil Pump Fuji Oil Pump Bleeding The oil pump must be bled following any repair service to the injection system
in length are present, fill oil supply lines with oil using small oil squirt can Troubleshooting NOTE: See Maintenance section
for adjustmentinspection information1 Remove lines from their fittings at the engine and pumpBlow through them to ensure
they are not plugged or restricted2Apply some pressure to the check valve fittings with the Mity VacHA or similar toolThese
valves should open with 2-5 lbsof pressure Be sure oil feed lines fit tightly, are not cracked or leaking4 Be sure the in-line
filter between oil pump and oil tank is clean and bleeding is complete5If oil still won't flow, replace the oil pumpApply
2-5 Ibspressure NOTE: 1995 and later models are equipped with variable oil pump controlled by link rod between the carburetors