1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 346Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 346

FINAL DRIVEJET PUMPBILGE SYSTEM Pump Data Final Drive Jet Pump Torque Values Application Driveshaft Through Hull Fitting
Steering Nozzle Mounting Bolts Steering Cable Bolt (Nozzle End) Trim Nozzle Mounting Bolts 14"to 78" micro hose clamps 1"
and larger hose clamps 262 indicates use of LoctiteTM 262 thread locking agent (red)Note: 271 is an acceptable substitute242
indicates use of LoctiteTM 242 thread locking agent (blue)Note: 243 is an acceptable substituteAS indicates use of light
coating of grease or Anti Seize compoundRemove rubber gasket and apply Marine Grade or Loctite TM Ultra Blue silicone sealant
per Service Bulletin PWC-95-17 Do not install fasteners dryAlways clean fasteners before installing Pump Service Special
Tools Special Tool Impeller Removal Tool Coupler Removal Tool Pump Alignment Tool Grease Gun Adaptor Through-Hull Fitting
Tool 2871036 2871037 2871343 2871174 2871425 Part Number Used to remove impeller Used to remove solid couplers only Check