1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 367Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 367

FINAL DRIVEJET PUMPBILGE SYSTEM Pump DisassemblyInspection (1992-1993 Models) 1992-1993 Models 11Inspect shaft and collar
bearing spacerDrive out other bearing, removing seals with bearingSee page 5.22 for bearing and seal installation procedJre
13Measure spacer length with vernier caliperReplace if worn beyond the service limitIf the spacer is too short, the bearings
will be side loaded and premature wear will result 14Engine driveshaft coupler can be removed with coupler removal tool,
identified by double knurling on shaftDiameter of coupler removal tool is .787" (20 mm)Refer to engine section for procedure