1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 374Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 374

FINAL DRIVEJET PUMPBILGE SYSTEM Pump DisassemblyInspection 1994 to Current Models 1994 to Current Models 21Pump removal is
23On models with extended pump, remove pump extension 24Remove driveshaft from impeller by pulling straight outwardNOTE:
If the pump housing, intake scoop, or ride plate must be removed, refer to page 5.35 Drive Shaft Inspection 21Clean driveshaft
and support inblocks as shown (C)Measure runout by rotating shaft and observing dial indicator at point "8"Replace if runout
exceeds the service limitNOTE: Excessive driveshaft runout can cause vibration, bearing, and spline failureSee PumpFinal