1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 388Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 388

FINAL DRIVEJET PUMPBILGE SYSTEM Pump To Hull Alignment Pump Stud Installation, Cant3If stud is tightened completely in housing
tube, and studs (to seal stud in hull)Install pump5Hold pump inward tightly against hull while an assistant lightens stud
mounting nuts inside hullTorque evenly in three steps to 28 ftIbs(3.87 kg-m) APRly Sealant 6Torque pump mounting nuts (outside
of hull) evenly in three steps to 28 ftIbs(3.87 kg-m) using criss cross pattern7Check to be sure pump housing is tight against