1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 421Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 421

HULLDECK, STEERING AND CONTROLS Steering CoverSteering Post Steering CoverSteering Post (Handlebar) Removal CantSLT Models
switch screws, separate the switch and set it aside SLT ModelsRemove screws (4) NOTE: The switch screws must be tightened
in the proper order upon reassembly for proper switch functionSee pages 6.56.125Remove steering arm bolt and move arm aside
with cable attached NOTE: Spacer washers may be located on top and bottom of postKeep them in order for reassembly6Slide
post up and out of the support hub and remove bushingsReverse prccedure for reassemblyGrease post bushingsInspect and adjust
steering alignmentRefer to page 6.28-6.30Re-install coverRoute wires and cable behind handlebar and through seal grommet