1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 459Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 459

ELECTRICAL Electric Starter Testing Electric Starter System Testing Condition: Starter fails to turn motor or motor turns
start switch with the switch on startRepair or replace any defective part(s) Reconnect the solenoidConnect the tester black
lead to the battery positive terminal and the red tester lead to the solenoid end of the battery-to-solenoid cable Push the
start buttonThe reading must be less than .1 DCIs it? Clean the battery to solenoid cable ends or replace the cable Connect
the black tester lead to the solenoid end of the battery-to-solenoid cable and the red tester lead to the solenoid end of
the solenoid-to-starter cablePush the start button The reading must be less than .1 DC, Is it? Replace the starter solenoid
- Connect the black tester lead to the solenoid end Clean the solenoid-to-starter cable ends or of the solenoid-to-starter
cable and the red tester replace the cablelead to the starter end of the same cablePush the start buttonThe read ing must
be less than .1 DCIs it? Connect the black tester lead to the starter frameConnect the red tester lead to the battery negative