1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 574Get this manual

1992-1998 Polaris Personal Watercraft Service Manual PN 9912201, Page 574

ELECTRICAL Exhaust Valve Electrical Control System Troubleshooting Continued1Disconnect the multi-prong connector at the
temporary connections with the probesMeasure the resistance between the LGN wire and the Green wire on the exhaust valve
motor harnessSPECIFICATION: 5000 ohms 10 5Reverse your connections ((WR to the ground side of the battery and WBlk to the
positive side of the battery)The exhaust valves should close6Measure the resistance between the LGN wire and the Green wireSPECIFICATION:
860 ohms 10 If the exhaust valve actuator successfully passes all of the above tests and the unit fails to function properly,