1997-1998 Polaris SLX-Pro 785 Service Manual Supplement, Page 45Get this manual

1997-1998 Polaris SLX-Pro 785 Service Manual Supplement, Page 45

http:ReadManm ENGINECOOLING Oil PumpFuji Oil Pump Bleeding The oil pump must be bled following any repair service to the
present, fill oil supply lines with oil using small oil squirt can Troubleshooting NOTE: See Maintenance section for adjustmentinspection
information 8Remove lines from their fittings at the engine and pumpBlow through them to ensure they are not plugged or restricted
Apply some pressure to the check valve fittings with the Mity VacTM or similar toolThese valves should open with 2-5 lbsof
pressure10 Be sure oil feed lines fit tightly, are not cracked or leaking11 Be sure the in-line filter between oil pump and
oil tank is clean and bleeding is complete12 .If oil still won't flow, replace the oil pumpNOTE: This machine is equipped
with variable oil pump controlled by link rod between the carburetors and the pump armThis is non-adjustable rodIt is necessary