1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 16Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 16

GENERAL INFORMATION Service Tips In order to perform service work efficiently and to prevent costly errors, the technician
to see if cause forthe difficulty can be foundIf it is necessary to tap the part into place, use soft face hammer and tap
lightly Some of the fasteners were installed with locking agentsdamage to fasteners Use of impact drivers or wrenches will
help avoid Always follow torque specifications as outlined throughout this manualIncorrect torquing may lead to serious machine
damage or, as in the case of steering components, can result in injury or death for the rider(s) If torquing sequence is
indicated for nuts, bolts or screws, start all fasteners in their holes and hand tightenThenfollowing the method and sequence
indicated in this manualtighten evenly to the specified torque valueWhen removing nuts, bolts or screws from part with several
fastenersloosen them all about 14 turn before removing them If the condition of any gasket or O-Ring is in question, replace