1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 41Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 41

MAINTENANCEfTUNE UP Cable Adjustments Alternate Method Of Measuring Nozzle Following is an alternate method for checking
center line from rear of steering or trim nozzle to stationary nozzleDistance should be equal Adjustment Procedure 1Minor
adjustments can be made using the steering cable rod end(s)Loosen jam nut on rod end(s)Remove end from top of steering nozzleTurn
rod end in or out to adjustReinstall rod end, apply Loctite 242 (Blue) and tighten ball 10 specificationsSee Ill2 Small adjustments
can be made with rod end(s)40 inIbs CAUTION:( The cable must be threaded into the rod end minimum of 38" (1 Dmm)Do not attempt