1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 113Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 113

FUEL SYSTEMCARBURETION Reed Valve Removal Reed Valve Removal 1Remove air box inlet and hose clampRemove air box cover and
for possible air leaksRemove reed stuffers, reed gaskets, assembly, and lower reed gaskets Reed Valve InspectionThoroughly
inspect condition of reed valve stuffers, reed valves and gasketsReplace if necessaryReed valves are sometimes held open
by carbon or other small particlesRemove screws from reed stopRemove the reed, making sure not to flip the reed if it is
to be re-usedReverse positioning of reed will cause breakage3 Wipe reed cage and reed valve cleanReassemble reed, reed stop
and screws to cage and tightenNOTE: If gap of greater than .015" (.4 mm) exists, replace the reed valveClean and dry components