1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 155Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 155

ENGINE AssemblyPolaris Engines 62 If impulse fitting was removed, apply pipe sealant and reinstallTorque 10 specificationIf
Oil Pump Bolt Torque- 60 inIba(.69 kg-m) 64 Install oil pump cable and connect oil lines 10 oil pump and carburetors (throttle
bodies)Adjust as outlined on pages 2.192.2065 Bleed oil pump and oil lines to ensure no air is trapped in pump or lines see
page 4.4266 Apply light film of grease to crankshaft threads and install drive couplerTighlen hand light67 Thoroughly grease
splines inside coupler and replace sealing Oring68 Install ignition coilsTorque to specification Ignition Coil Bolt Torque-