1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 180Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 180

FINAL DRIVEJET PUMPBILGE SYSTEM Pump DisassemblyInspection 5Remove four (4) mounting boltsPump removal is easier if an assistant
impeller by pulling straight outward NOTE: If the pump housing, intake scoop, or ride plate must be removed, refer to page
5.23 Drive Shaft Inspection 1Clean driveshaft and support inblocks as shown (C)Measure runout by rotating shaft and observing
dial indicator at point "8"Replace it runout exceeds the service limit NOTE: Excessive driveshaft runout can cause vibration,