1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 193Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 193

FINAL DRIVEJET PUMPBILGE SYSTEM Pump To Hull Alignment 3Grease the large pump sealing -ring and apply Marine Grade Silicone
three steps to 28 ftIbs(3.87 kg-m)Tighten 28 ftIbs(3.87 kg-m) 5Torque pump mounting nuts (outside of hull) evenly in three
steps to 28 ftIbs(3.87 kg-m) using criss cross pattern 6Check to be sure pump housing is tight against hullTo inspect pump-ta-hull