1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 194Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 194

FINAL DRIVEJET PUMPBILGE SYSTEM Driveshaft Lubrication (All Models) Driveshaft Lubrication CAUTION: Grease the drive shaft
Lubrication 1234Remove lanyard cord and lock plate from the engine stop switchRemove seatRemove battery ground (-cableLoosen
clamp holding plastic driveshaft shroud in place and rotate it 180 (See Ill1)Solid Couplersturn driveshaft coupler until
grease fitting is accessibleBonded rubber couplersdrive shaft must be removed to grease splinesSee maintenance guidelines
in Maintenance Section, and refer to drive shaft removal in this sectionUsing grease gun with Polaris grease gun adaptor
lubricate coupler at the grease fitting until the coupler boot just begins to expandLubricate bearing housing at grease fitting
until grease purges past the sealsUse only Polaris Premium Marine or All Purpose grease Bonded Rubber Coupler (Must remove
drive shaft to grease) Front of Craft- GreaseL X-4S shown Coupler Shroud Polaris Premium All Season Grease 14 ozTube PN 2871423