1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 213Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 213

HULUDECK, STEERING AND CONTROLS Cable Adjustments Steering Cable Adjustment Forward 1Remove handlebar padVisually center
shown Place straight edge across horizontal center line of steering nozzle or trim nozzleNOTE: he trim nozzle mounting bolts
can be used as reference for the center line on models with Quick TrimSee Ill2 Rear View Of Pump Nozzle Place straight edge
across horizontal center line of steering nozzle or trim nozzle Measure distance from straight edge to hull on left and right
sideBe sure to measure at right angles to the straight edge and at equal distances from the nozzle The distance at "X" should