1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 214Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 214

HULUDECK, STEERING AND CONTROLS Cable Adjustments Alternate Method 01 Measuring Nozzle Following is an alternate method for
be equalIll1 Adjustment Procedure 1Minor adjustments can be made using the steering cable rod end(s)Loosen jam nut on rod
end(s)Remove end from top of steering nozzleTurn rod end in or out to adjustReinstall rod end, apply Small adjustments can
be made with rod Loclile 242 (Blue) and tighten bolt to specificationsSee Ill2 CAUTION: The cable must be threaded into the
rod end minimum of 38" (10mm)Do not attempt major adjustments with the rod ends Wire Clip Replacement 1"replacementofthe
wire clips becomes necessarythoroughly clean the area around the anchor with lacquer thinner or acetoneApply two part epoxy