1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 215Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 215

HULUDECK, STEERING AND CONTROLS Cable Adjustments Adjustment Procedure Cont3Apply Loctite 242 (Blue) to threads of cable
compartment and remove storage tray for access to bottom nutThe cable is not adjustable at the through-hull end See Ill35Using
two 1116" open end wrenches, hold one nut and loosen the otherLengthen or shorten cable to adjust nozzle centeringTighten
cable nuts securely after adjustment is complete 6Turn handlebars to left and right through entire steering range The bars
should move freely and smoothly without binding If resistance or binding is evident check rod end positioning, cable condition,