1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 219Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 219

HULUDECK, STEERING AND CONTROLS FRC Fiberglass Repair Gel Coat Nick or High Spot Repair 1Lightly sand area using 600 grit
polyester resin and catalyst to complete the repair, following instructions for resin being usedApply resin to inside of
patch area using disposable paint brushLay in small pieces of shredded fiberglass matUse the paint brush to force air bubbles
outAdd more resin and move mat around NOTE: Pieces of mat between 1" to 2" (2.5 to cm) square work best789Keep adding mat
and resin until patch area is filled up to the original thicknessLet resin cure thoroughlyRemove masking tape from outside
of repair 10Remove any high spots from outside with disc grinder11Fill and smooth any defects with polyester auto body filler12Sand