1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 229Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 229

ELECTRICAL Charging SystemSwitch TestingGenesisX-4S Charging System Testing (Regulated Voltage) 12Turn mullitester dial to
123Set multitester to ohms (0) positionUnplug MFDMFI connectorConnect one of the test leads to the redpurple pin and the
other lead 10 the yellowred pinDepress start buttonThe reading should be .3 ohms or lessA high resistance or open reading
indicates faulty switchRelease start buttonAn open reading (OL) should be indicatedIf low resistance is measured, replace
the switchTether Switch Testing 123Set multitester to ohms (0) positionUnplug stop switch connector (blackyellow and black
wires)Connect one of the test leads to the blackyellow pin and the other lead to the black pinPush kill button or disconnect