1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 238Get this manual

1999 Polaris PWC Genesis, Ficht, X-45 Service Manual, Page 238

ELECTRICAL Electric Starter Testing Electric Starter System Testing Condition: Starter fails to turn motor or motor turns
cablePush the start buttonThe reading must be less than .1v DCIs it? YesConnect the black tester lead to the solenoid end
of the battery-to-solenoid cable and the red tester lead to the solenoid end of the solenoid-to-starter cablePush the start
buttonThe reading must be less than .1v DCIs it? YesConnect the black tester lead to the solenoid end of the solenoid-to-starter
cable and the red tester lead to the starter end of the same cablePush the start buttonThe reading must be less than .1vDC.lsit?
Yes! Connect the black tester lead to the starter frameConnect the red tester lead to the battery negative terminalPush the
start buttonReading should be less than .1v DCIs it? Yes! If all these tests indicate good condition, yet the starter still
fails to turnor turns slowly, the starter must be removed for static testing and inspectionClean the ends of the engine-to-battery
negative cable or replace the cableClean the solenoid-to-starter cable ends or replace the cableReplace the starter solenoidClean