1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 44Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 44

MAINTENANCEfTUNE UP Cable AdjustmentFuel System Reverse Cable Adjustment The reverse cable does not require periodic adjustmentIf
locking by pulling up on gate when in down positionMove shift lever to forward positionReverse gate must be above water streamTighten
adjuster nuts securelySeal the cable threads and adjuster nuts with marine grade silicone sealant (PN 8560054) and tighten
securelyAllow sealant to cure fully before operating craft Carb Air IntakeVortexTM Remove (9) nuts and washers, and remove
each air intake Cover carburetor with clean shop towel to prevent foreign material from enteringClean element with high flash
point solvent, followed by hot soapy waterRinse in clear water and dry thoroughly using low pressure air Wear safety glasses