1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 103Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 103

FUEL SYSTEMCARBURETION Carburetor RemovalMikuni Low Speed Mixture Screw Adjustment (Mikuni and Keihin) NOTE: Synchronize
and adjusting low speed screws in (to lean) or out (to rich en) mixture until smooth idle and good throttle response is obtained
Pro 785 Carburetor Removal 1Remove airbox cover screen and intake base boltsCarefully remove oil injection lines from intake
base by removing spring clamps and pulling oil line from injection fittingsMove intake base asideDisconnect oil pump rod34
Loosen (6) nuts from underside of carburetor assembly and lift carburetors off as unitNOTE: When reassembling be sure to