1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 192Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 192

ENGINECOOLING Engine InstallationPolaris Engines Engine Installation Engine installation is done in reverse order of the
system and electrical boxRemember to inspect for damage on any wiring, hoses, or lines before and after reinstalling the
engineMake sure all cables, hoses, and wiring are routed and secured properlyAdjust throttle cable and check throttle operationIt
must operate freely and return completely when released Verify proper operation of engine stop switchAfter engine installation,
pump alignment must be inspectedRefer to the Final Drive section for inspection and alignment proceduresSynchronize carburetors
and be sure they are cleanAdjust oil pump cable and bleed pumpThe first tank of fuel should be pre-mixed with Polaris Premium
cycle or Premium Synthetic cycle oil at 40:1 ratio Shims used for engine and driveshaft alignment must be reinstalled in
their original locationsDo not allow them to be mixed up Always verify proper engine to pump alignment after engine installation