1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 206Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 206

ENGINECOOLING Disassembly InspectionPro 785 5Loosen 6mm bolt, Bmm bolts (16), and 10mm bolts (4) from the crankcase 14 turn
pins, and crankcase alignment dowel pinsB Remove crankshaft and clean crankcase sealing surfaces thoroughly to remove all
old sealer 9 Remove seals, a-ring, and spacer from PTa end of crank shaftRemove seal from Magneto end NOTE: The metal sides
of the PTa end seals face each otherThe innermost seal has an outer rib to fit into the groove in the crankcaseAlways replace