1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 209Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 209

ENGINECOOLING AssemblyPro 785 Crankshaft Installation 1 Grease oil pump drive gear and seal lips of crankshaft seals with
on the Magneto end seal faces inward toward the crankshaft 2 Grease and install a-ring on shaft, followed by sleeveInstall
sleeve carefully to be sure spring stays in position on seal lip during installation3 Install crankshaft in upper crankcaseMake
sure bearing anti-rotation pins are in correct position in case slots, and seals are properly positioned Nicks, burrs, or