1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 212Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 212

ENGINECOOLING AssemblyPro 785 NOTE: Before installing the cylinder, see honing, measuring and cleaning procedures at the
carefully slide cylinder down into place14 Apply LoctiteTM 242 (blue) to studs and torque cylinder base nuts in steps to
35-40 ftIbs(4.83-5.52 kg-m) using criss-cross pattern 15 Install new head gaskets noting the correct location and markingThe
word "UP" must be up and readable and the letters "EX" must face the exhaust side Toward Exhaust Manifolds 16 Apply 10ctiteTM
242 (Blue) to threads of cylinder head studsInstall nuts and torque in three steps to 18 ftIbs(2.20 kg-m) following the torque