1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 215Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 215

ENGINECOOLING AssemblyPro 785 25 Inspect clamps for proper tension and concentricityReplace any clamps that are distorted
the lines will cause serious engine damage26 .If carburetor intake base and studs were removed, replace gaskets and install
Intake assemblyApply LoctiteTM 242 (Blue) to both ends of studs and torque studs and nuts to 78 inIbs(.9 kg-m) Use care when
using Loctite to ensure it doesn't enter carbs or gum up linkages or cables 1M 27 Clean exhaust manifold gasket surfaces