1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 216Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 216

ENGINECOOLING AssemblyPro 785 28 Install stator plate and wire harness weatherproof grommet and retainerApply Bond 1215 to
to 78 inIbs(.9 kg-m) r-J en co co co IMPORTANT: Flywheel Installation Information 1 Apply LoctiteTM 262 (Red) to flywheel
crankshaft taper and installApply Loctite 242 (Blue) to crankshaft nut threads and torque nut to specification ,Specification
:, " 65ft.lbs(B.97kg-m): 2Install outer magneto coverUse LoctiteTM 515 gasket eliminator on mag cover mating surfaces and
torque bolts to 14 ftIbs(1.93 kg-m)CD 3Make sure starter motor mount is clean and free of corrosionSlide starter motor into