1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 219Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 219

ENGINECOOLING Oil PumpPro 785 (Fuji) Oil Pump Bleeding The oil pump must be bled following any repair service to the injection
are present, fill oil supply lines with oil using small oil squirt can Troubleshooting NOTE: See Maintenance section for
adjustmentinspection information 8Remove lines from their fittings at the engine and pump Blow through them to ensure they
are not plugged or restricted9 Apply some pressure to the check valve fittings with the Mity VacTM or similar toolThese valves
should open with 2-5 Ibsof pressure10 Be sure oil feed lines fit tightly, are not cracked or leaking11 Be sure the in-line
filter between oil pump and oil tank is clean and bleeding is complete12 If oil still won't flow, replace th oil pumpNOTE:
This machine is equipped with variable oil pump controlled by link rod between the carburetors and the pump armThis is non-adjustable