1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 224Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 224

ENGINECOOLING Thermostat Pop Off Assembly Thermostat Pop Off Assembly If low end performance of the watercraft begins to
off assembly is under tension from an internal springWhen the screws are removedthe assembly will come apart quickly if not
held together firmly1 Remove screws while holding thermostat pop off assembly firmly togetherCarefully take assembly apartBe
careful not to lose any parts2 Check thermostat pop off assembly for debris, such as seaweed, and clean it out3Check condition
of rubber elementsAlso check thermostat and housing for corrosion Replace any parts that appear in poor condition4Assemble
thermostat pop off assembly in correct sequenceAssemble carefully to ensure proper alignment between all internal parts and
be sure the gasket or O-ring is properly positionedThe arrow indicates the direction of water flow (away from engine)5Attach