1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 245Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 245

FINAL DRIVEJET PUMPBILGE SYSTEM Pump Disassemblyllnspection Drive Shaft Inspection, Cont8Remove assembly from viseUsing soft
bearing spacer to one side enough to expose inner bearing racesDrive out tail cone end bearing and remove spacerDrive other
bearing out removing seals with bearingSee page 5.18 for bearing and seal installation procedure 11 Measure spacer length
with Vernier caliperReplace if worn beyond service limitIf the spacer is too short, the bearings will be side loaded and