1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 250Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 250

FINAL DRIVEJET PUMPBILGE SYSTEM Pump Housing Removal Pump Housing Removal 1Remove pump and driveshaft5.13 for procedureRefer
pump housing nuts and washers (4) evenly in criss-cross patternPull the pump housing straight out to remove Intake Scoop
Ride Plate Installation and Sealing IMPORTANT! The area around the intake scoop and ride plate must be completely sealed
in order to prevent ventilation of the pump areaSee VentilationCavitation page 5.32 and pump alignment information on page