1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 257Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 257

FINAL DRIVEJET PUMPBILGE SYSTEM Driveshaft Lubrication (All Models) Driveshaft Lubrication Grease the drive shaft coupler
123Remove lanyard cord and lock plate from the engine stop switchRemove seatRemove battery ground (-) cableLoosen clamp holding
plastic driveshaft shroud in place and rotate it 1800 (See III1)Solid Couplersturn driveshaft coupler until grease fitting
is accessibleBonded rubber couplersdrive shaft must be removed to grease splinesSee maintenance guidelines in Maintenance
Sectionand refer to drive shaft removal in th is sectionUsing grease gun with Polaris grease gun adaptor lubricate coupler
at the grease fitting until the coupler boot just begins to expandLubricate bearing housing at grease fitting until grease
purges past the sealsUse only Polaris Premium Marine or All Purpose grease Solid Coupler (Grease at fitting) Front of Watercraft
Grease Fittings EngineIII1 Rotate Driveshaft Guard Bonded Rubber Coupler (Must remove drive shaft to grease) Front of Craft