1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 283Get this manual

1999 Polaris SLH, SLTH, SLX, SLTX, PRO785 Factory Service Manual, Page 283

HULUDECK, STEERING AND CONTROLS Cable Adjustments Adjustment Procedure Cont3Apply Loctite 242 (Blue) to threads of cable
podOpen front compartment and remove storage tray for access to bottom nutThe cable is not adjustable at the through-hull
endSee III35Using two 1116" open end wrenches, hold one nut and loosen the otherLengthen or shorten cable to adjust nozzle
centeringTighten cable nuts securely (22 ft.lbs3.04 kg-m) after adjustment is complete6Turn handlebars to left and right
through entire steering rangeThe bars should move freely and smoothly without bindingIt resistance or binding is evident