2000 Polaris Pro 785 Service Manual, Page 360Get this manual

2000 Polaris Pro 785 Service Manual, Page 360

ENGINECOOLING Engine Removal 1Turn off fuel valve2Remove seat; apply masking tape around seat opening to protect hull from
PTO pipe body11Remove two nuts from the pipe mounts(front of pipe 12Remove the water overboard hose13Disconnect the exhaust
valve cables at the exhaust valves14Remove the pipe through the seat opening15Follow the same procedure to remove the MAG
pipe16Follow the same procedure to remove the Center pipe17Remove electrical box coverUnplug engine wire harness connectorsRemove
harness grommet bracket and pull harness out of electrical box18Remove the battery ground cable at the engine19Unplug water
temperature sensor wire at engine20Disconnect battery positive (+) cable at starter motor 21 Disconnect fuel supply line