2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 108Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 108

http:ReadManm FUEL SYSTEMCARBURETION Reed Valve Removal Reed Valve Removal 1Remove air box inlet and hose clampRemove air
1Thoroughly inspect condition of reed valve stutters, reed valves and gasketsReplace if necessary2Reed valves are sometimes
held open by carbon or other small particlesRemove screws from reed stopRemove the reed, making sure not to flip the reed
if it is to be re-usedReverse positioning of reed will cause breakageWipe reed cage and reed valve cleanReassemble reed,
reed stop and screws to cage and tightenNOTE: If gap of greater than .015" (.4 mm) exists, replace the reed valveClean and
dry components for reassemblyApply Loctite 242 to reed stop screws for reassembly to engineSee installation of reed cage
and intake manifold in Engine Section Reed Pedal Clearance .015" (.38 mm) max Exaggerated for illustrationPolaris Sales Inc