2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 125Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 125

http:ReadManm ENGINE Engine RemovalPolaris Engines 15 .If engine will be completely disassembled, remove drive coupler from
coupler Use wrench on flats to remove coupler Use wrench on the flats of the coupler to removeDo not use coupler removal
tool PN 2871037 on the rubber coupler or misalignment may occur19 Remove engine mount nuts (4)With the aid of chain haist,
lift engine upward and out of hullEngine alignment shim(s) may be in place on one or more of the engine rubber mount studsNote
the number and location for reinstallationThe number of shims installed in production is written next to each mount with
permanent markerEngine rubber mounts are stressed during removal of mounting nutsBe sure to inspect the mounts carefully
and replace if damagedAlways inspect engine to pump alignment when ngine is reinstalledNOTE: Engine lifting eyes can easily
fabri by removing the upper porcelain from spark plug and welding large washer to the spfirk plug baseInstall one lifting