2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 161Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 161

http:ReadManm ENGINE Crankshaft Indexing Crankshaft IndexingSLX Pro 1200 Virage TX Genesis Polaris Watercraft crankshafts
for more accuracy, and make sure it is mounted concentrically with the crankshaft center lineCut slot in paper or cardboard
degree wheel and slide it over the drives haft if engine and pump shaft is installed in craftAgain, be sure to secure the
degree wheel2Sharpen coat hanger or section of welding rod and anchor it to convenient spotPoint the sharpened end at the
outer perimeter of the flywheel or drive coupler mounted degree wheel3Install dial indicator into the magneto end cylinder
spark plug hole (front) (#1)(The ignition timing is referenced by the magneto end 4Rotate the engine to bring the piston
to top dead center (TDG) on the cylinder with the indicator installedSLocate TDC as accurately as possible by finding the
center of the point where there is no piston movement"Zero" the dial indicator at this pointContinue to rotate the crankshaft
in the normal direction of rotation (counter clockwise as viewed from the rear of the craft) until the dial indicator reads