2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 163Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 163

http:ReadManm ENGINE Crankshaft Indexing Crankshaft IndexingGenesis FFI1M Polaris Watercraft crankshafts are pressed together
degree wheel for more accuracy, and make sure it is mounted concentrically with the crankshaft center lineCut slot in paper
or cardboard degree wheel and slide it over the drives haft if engine and pump shaft is installed in craftAgain, be sure
to secure the degree wheel2Sharpen coat hanger or section of welding rod and anchor it to convenient spotPoint the sharpened
end at the outer perimeter of the flywheel or drive coupler mounted degree wheel3Install bumper tool PN 2872604 into the
magneto end cylinder spark plug hole (front) (#1)(The ignition timing is referenced by the magneto end 4Rotate the engine
to bring the piston to the top of the cylinder, making contact with the bumper toolScribe mark on the degree wheel(See III1)
Rotate until resistance is felt Bumper Tool PN 2872604 Degree Wheel Scribe 2nd Mark 5Rotate the engine in the opposite direction