2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 193Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 193

http:ReadManm FINAL DRIVEJET PUMPBILGE SYSTEM Driveshaft Lubrication (All Models) Driveshaft Lubrication Grease the drive
driveshaft shroud must be rotatedFollow the instructions below in order to avoid personal injury Driveshaft Coupler Bearing
Housing Lubrication 1234Remove lanyard cord and lock plate from the engine stop switchRemove seatRemove battery ground (-)
cableLoosen clamp holding plastic driveshaft shroud in place and rotate it 1800 (See 111.1)Solid Couplersturn driveshaft
coupler until grease fitting is accessibleBonded rubber couplersdrive shaft must be removed to grease splinesSee maintenance
guidelines in Maintenance Section, and refer to drive shaft removal in this sectionUSing grease gun with Polaris grease gun
adaptor lubricate coupler at the grease fitting until the coupler boot just begins to expandLubricate bearing housing at