2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 217Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 217

http:ReadManm HULUDECK, STEERING AND CONTROLS Cable Adjustments Alternate Method Of Measuring Nozzle Following is an alternate
be equal Adjustment Procedure 1Minor adjustments can be made using the steering cable rod end(s)Loosen jam nut on rod end(s)Remove
end from top of steering nozzleTurn rod end in or out to adjustReinstall rod end, apply Loctite 242 (Blue) and tighten bolt
to specificationsSee III2 Small adjustments can be made with rod end(s) The cable must be threaded into the rod end minimum
of 38" (1 Omm)Do not attempt major adjustments with the rod ends Wire Clip Replacement 1If replacement ofthe wire clips becomes
necessary, thoroughly clean the area around the anchor with lacquer thinner or acetoneApply two part epoxy to the anchor