2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 221Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 221

http:ReadManm HULUDECK, STEERING AND CONTROLS FRC Fiberglass Repair Gel Coat Nick or High Spot Repair 1 Lightly sand area
to form moldMix enough polyester resin and catalyst to complete the repair, following instructions for resin being usedApply
resin to inside of patch area using disposable paint brushLay in small pieces of shredded fiberglass matUse the paint brush
to force air bubbles outAdd more resin and move mat around NOTE: Pieces of mat between 1" to 2" (2.5 to cm) square work best789Keep
adding mat and resin until patch area is filled up to the original thicknessLet resin cure thoroughlyRemove masking tape
from outside of repair 10Remove any high spots from outside with disc grinder11Fill and smooth any defects with polyester