2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 240Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 240

http:ReadManm ELECTRICAL Temperature WarningVirage TX SLX Pro 1200 Genesis Coolant Temperature Warning Circuit Operation
Polaris engines, the sensor is located on the exhaust manifoldGround the sensor wire from MFDMFI with engine running to see
if temp light activatesRefer to MFDMFI functiontesting in this section Temperature Sensor Test The temperaturewarning switch
is normally openUsing digital YOM set in the Ohms position, and with the wires disconnected, contact one test probe to the
switch terminal and the other test probe to engine groundThe meter should show an open circuitHeat the switch in water bath
to the "on" temperature listed on page 7.3Measure resistance of the switchReading should be less than .4 ohms When testing