2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 294Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 294

http:ReadManm FFI1M FUEL INJECTION Specifications Tests SERVICE SPECIFICATIONS Fuel System Pressure Injector Unit Resistance
terminal and coil primary terminal Crankshaft Position Sensor Resistance Test: Measure resistance of sensor Throttle Position
Sensor Resistance Test: Contact meter leads to red and black wire sensor pinsMeter should read greater than 3000 QMove one
meter lead to green wire pin and move sensor arm smoothlymeter reading should change evenly with arm movementRetain meter
lead on green wire pin and alternate the other lead to the other sensor pinRepeat procedureany erratic meter reading change
indicates sensor problem Air Temperature Sensor Resistance Test Water Temperature Sensor Resistance Test: Measure resistance
of sensor Stator Resistance Tests: NOTE: Disconnect battery cables before proceeding with this test1Disconnect stator 12
pin connector from EMM2Connect one meter lead to stator connector #1 and the other meter lead to stator connector #123Continue