2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 312Get this manual

2000 Polaris Virage TX, SLX, Pro 1200, Genesis, Genesis FFI Personal Watercraft Service Manual, Page 312

http:ReadManm DIAGNOSTIC SOFTWARE Cylinder Drop Test When the engine is running above 2000 RPM, the Cylinder Drop Testing
the cylinder that is misfiring, the misfire will stopYou can focus on that cylinder To Diagnose Low Performance or Rough
Running: Run the engine under load (in the water at 2000-2500 RPM) and drop each cylinderWatch the RPM on the screen or on
the tachometerThe RPM drop will be substantially less on cylinder that is weakIf you drop cylinder and the engine RPM does
not change at all, that cylinder has problemWhen you are finished with the Cylinder Drop Testing Menu, type "X" or press
the "ESCAPE" key to return to the Main Menu CYLINDER DROP TEST #1 IS RUNNING TEST WILL STOP IN 10 SECONDS CURRENT RPM IS:
2250 PRESS ANY KEY TO STOP MENU OPTIONTiming Verification Procedure To enter the Timing Verification Program, type"4" on
the FFI Diagnostics menuPress ESC to exit the Timing Verification ProcedureThe timing verification screen, displayed to the
right, will allow the user to verify proper engine timingIn order to perform the test correctly, engine RPM must be between