2001 Polaris SLH, Virage PWC Factory Service Manual, Page 19Get this manual

2001 Polaris SLH, Virage PWC Factory Service Manual, Page 19

General Information Service Guidelines In order to perform service work efficiently and to prevent costly errors, the technician
see if cause for the difficulty can be foundIf it is necessary to tap the part into place, use soft face hammer and tap lightlySome
of the fasteners were installed with locking agents Use of impact drivers or wrenches will help avoid damage to fastenersAlways
follow torque specifications as outlined throughout this manualIncorrect torquing may lead to serious machine damage or,
as in the case of steering components, can result in injury or death for the rider(s) If torquing sequence is indicated for
nuts, bolts or screws, start all fasteners in their holes and hand tightenThen, following the method and sequence indicated
in this manual, tighten evenly to the specified torque valueWhen removing nuts, bolts or screws from part with several fasteners,
loosen them all about 14 turn before removing themIf the condition of any gasket or O-Ring is in question, replace it with